HEADERS 37

RACING WHEELS BEADLocK ROCKCRAWLER  AND OFF ROAD WHEELS BY MRW

MANUFACTURERS OF "CUSTOM BUILT" MOTORSPORTS WHEELS SINCE 1955

TECHNICAL CHARTS 

16# OUTLAW  wheels | STAGE II  wheels | STAGE III  wheels | STAGE IV wheels ULTRA STAR  wheels | ECONO STAR  wheels | CHROME wheels  | STOCK CAR WHEELS | RALLY WHEELS | WHEEL PARTS  | BEADLocK  OPTIONS | BEADLocK  KITS | BEADLocK  PARTS   | CRASH PROTECTION | BEADLocK  INSTALLATION | CHECK` OFFSET | BOLT PATTERNS | ACCESSORIES  |  HISTORY | |

MRW  ROCK CRAWLER WHEELS  15"  | 16"   | 16.5  |  17"  | 18"  | 20"

MRW  OFF ROAD WHEELS  15"  |  16"  | 16.5" | 17"  |   18"  |  20"  | 22"

NECESSARY ACCESSORIES

STICK ON MRW DECALS | MAGNETIC PAINT  | BEAD BREAKER | TRACTION ADVANTAGE |  LUG NUTS  | CARBIDE DISK  | ROLL CAGES | SAFETY INFLATOR  | TIRE IRONS |  | CHROME CENTER CAPS   | TIRE STAGGER  TAPE | LOW PRESSURE GAUGES | VALVE STEMS |  SPORTS APPAREL | TIRE GROOVER |  TIRE SIPING TOOL |   MRW BANNERS

MRW IS PROUD TO OFFER SCHOENFELD HEADERS ONCE AGAIN WITH OUR NEW EXPANDED LINE OF RACING ACCESSORIES

This site is best viewed at 800 x 600

  1-800-643-3625     E-mail  mrtwheels@yahoo.com

Small Block Chevy

Street Stock Headers

Scroll down when page completes loading

Small Block Chevy

Go to Product Index   

   Go to Home Page

This site is best viewed at 800 x 600

Street Stock

1972 - 1987 Chevy Malibu, Monte Carlo, 
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Also Camaro 70 - 81.
Clears side and rear engine mounts. Motor must be in stock location.  Will Fit straight or angle plug heads.
  Will not clear stock manual clutch linkage ball or air-condition box. Must use short oil filter.

Oil Filters Such As - Wix 51069 - AC PF24

TUBE
DIAMETER

COLLECTOR
DIA. / LENGTH

STANDARD
CHEVY

CRATE
MOTOR

PRICE

SPREAD
PORT

STANDARD 18 DEG.

PRICE

1 1/2" - 1 5/8"

3" x 8"

184V

------

239.95

------

------

------

1 5/8"

3" x 8"

185

185CM

179.95

------

------

------

1 5/8 "- 1 3/4"

3" x 8"

185V

185VCM

229.95

------

------

------

1 3/4"

3" x 8"

186-3

186CM-3

179.95

186SP-3

186-18-3

239.95

1 3/4"

3 1/2" x 8"

186

186CM

179.95

186SP

186-18

239.95

1 3/4" - 1 7/8"

3 1/2" x  9"

186V

186VCM

259.95

186VSP

186V18

319.95

1 7/8"

3 1/2" x  9"

187

------

299.95

187SP

187-18

359.95

BOLTS AND GASKETS INCLUDED

 

1972 - 1987 Chevy Malibu, Monte Carlo, 
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Also Camaro 70 - 81.
Clears side and rear engine mounts. Will Fit straight or angle plug heads.
  Will clear stock manual clutch linkage ball. Must use short oil filter. Will not clear air-condition box.

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA. / LENGTH

STANDARD
CHEVY

CRATE
MOTOR

PRICE

1 1/2 "- 1 5/8"

3" x 8"

184VM

----

239.95

1 5/8"

3" x 8"

185M

185MCM

179.95

1 5/8 "- 1 3/4"

3" x 8"

185VM

185VMCM

229.95

1 3/4"

3 1/2" x 8"

186M

186MCM

179.95

1 3/4"

3" x 8"

186M-3

186MCM-3

179.95

1 3/4" - 1 7/8"

3 1/2" x 9"

186VM

186VMCM

259.95

1 7/8"

3 1/2" x 9"

187M

-----

299.95

Street Stock
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle

Conventional Style Headers for Cars with Engine in Stock Location or engine set back.
         Clears side and rear engine mounts. 
Will fit  straight and angle plug heads. Must use short oil filter.

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA. / LENGTH

STANDARD
CHEVY

CRATE
MOTOR

PRICE

SPREAD PORT

STANDARD
18 DEG

PRICE

1 1/2" - 1 5/8"

3" x 8"

164VA

------

239.95

------

------

------

1 5/8"

3" x 8"

165A

165ACM

179.95

------

------

------

1 5/8" - 1 3/4"

3" x 8"

165VA

165VACM

229.95

------

------

------

1 5/8" - 1 3/4" - 1 7/8"

3 1/2" x 9"

165V3A

165V3ACM

299.95

------

------

------

1 3/4"

3 1/2" x 8"

166A

166ACM

179.95

166ASP

166A18

239.95

1 3/4"

3" x 8"

166A-3

166ACM-3

179.95

166ASP-3

166A18-3

239.95

1 3/4" - 1 7/8"

3 1/2" x 9"

166VA

166VACM

259.95

166VASP

166VA18

319.95
1 7/8"

3 1/2" x 9"

167A

------

299.95

167ASP

167A18

359.95


Conventional Style Headers for Car with Engines
in Stock Location or engine set back.
Will not fit angle plug heads.
Will not clear rear engine mounts.

Camaro 70 - 81
Chevelle, Monte Carlo 64 - 77, Nova 75-79

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA. / LENGTH

STANDARD
CHEVY

PRICE

1 1/2 "- 1 5/8"

3" x 8"

164V

239.95

1 5/8"

3" x 8"

165

179.95

1 5/8 "- 1 3/4"

3" x 8"

165V

229.95

1 5/8 "- 1 3/4" - 1 7/8"

3 1/2" x 9"

165V3

299.95

1 3/4"

3 1/2" x 8"

166

179.95

1 3/4"

3" x 8"

166-3

179.95

1 3/4" - 1 7/8"

3 1/2" x 9"

166V

259.95

1 7/8"

3 1/2" x 9"

167

299.95

 .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 

 

Street Stock Tri Y
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA.

STANDARD
CHEVY

PRICE

1 5/8 "- 1 3/4"

3"

165VAY

599.95

1 3/4 "- 1 7/8"

3 1/2"

*166VAY

619.95

*Available Spread Port & 18 deg. add $60.00

   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  

Stock Clip

 

 

The all new Schoenfeld stock clip header was designed to eliminate clearance problems encountered with chassis style headers on 70-81 camaros and 78-82 metric clip cars.  The over the frame style header which exits out at mid-fender fits the stock firewall and upper A-frames with the engine in the factory location.  Gone are starter, oil pan, oil filter, spark-plug and ground clearance problems.  Both headers are available in straight diameter and stepped configuration.  

BOLTS AND GASKETS INCLUDED

New! Camaro Stock Clip

      

TUBE
DIAMETER

COLLECTOR
DIA./LENGTH

STANDARD PORT

CRATE MOTOR

PRICE

1 5/8"

3" X 8"

103

103CM

189.95

1 5/8" X 1 3/4"

3" X 8"

103V-3

103VCM-3

239.95

1 5/8" X 1 3/4"

3 1/2" X 8"

103V

103VCM

239.95

1 3/4"

3" X 8"

104-3

104CM-3

189.95

1 3/4"

3 1/2" X 8"

104

104CM

189.95

1 3/4" - 1 7/8"

3 1/2" X 9"

104V

104VCM

249.95

FRONT VIEW

TOP VIEW

 

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .

 

New! Metric Stock Clip

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA./LENGTH

STANDARD PORT

CRATE MOTOR

PRICE

1 5/8"

3" X 8"

107

107CM

189.95

1 5/8" X 1 3/4"

3" X 8"

107V-3

107VCM-3

239.95

1 5/8" X 1 3/4"

3 1/2" X 8"

107V

107VCM

239.95

1 3/4"

3" X 8"

108-3

108CM-3

189.95

1 3/4"

3 1/2" X 8"

108

108CM

189.95

1 3/4" - 1 7/8"

3 1/2" X 9"

108V

108VCM

249.95

     

FRONT VIEW
TOP VIEW

 

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .

 

Stock Clip Header

Fits straight or angle plug heads
Also available for spread port heads - ADD $60.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall.

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA/LENGTH

STANDARD
CHEVY

CRATE
MOTOR

PRICE

1 1/2"-1 5/8"

3" x 8"

154V

----

239.95

1 5/8"

3" x 8"

155

155CM

179.95

1 5/8"-1 3/4"

3 1/2" x 8"

155V

155VCM

229.95

1 5/8"-1 3/4"

3" x 8"

155V-3

155VCM-3

229.95

1 3/4"

3 1/2" x 8"

156

156CM

179.95

1 3/4"

3" x 8"

156-3

156CM-3

179.95

1 3/4"-1 7/8"

3 1/2" x 8"

156V

156VCM

239.95

 

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .

Fits straight or angle plug heads
Also available for spread port heads - ADD $60.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall.

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA/LENGTH

STANDARD
CHEVY

PRICE

1 1/2"-1 5/8"

3" x 8"

120V

259.95

1 5/8"

3" x 8"

121

199.95

1 5/8"-1 3/4"

3 1/2" x 8"

121V

249.95

1 5/8"-1 3/4"

3" x 8"

121V-3

249.95

1 3/4"

3 1/2" x 8"

122

199.95

1 3/4"

3" x 8"

122-3

199.95

1 3/4"-1 7/8"

3 1/2" x 8"

122V

259.95

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  

 Fits straight or angle plug heads
Also available for spread port heads - ADD $60.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall or stock A-frame.

BOLTS AND GASKETS INCLUDED

TUBE
DIAMETER

COLLECTOR
DIA/LENGTH

STANDARD
CHEVY

PRICE

1 1/2" - 1 5/8"

3" x 8"

124V

249.95

1 5/8"

3" x 8"

125

189.95

1 5/8"-1 3/4"

3 1/2" x 8"

125V

239.95

1 5/8"-1 3/4"

3" x 8"

125V-3

239.95

1 3/4"

3 1/2" x 8"

126

189.95

1 3/4"

3" x 8"

126-3

189.95

1 3/4" - 1 7/8"

3 1/2" x 8"

126V

249.95

Schoenfeld Headers are not legal for sale or use on any pollution controlled motor vehicle.

 

 

click" Return To Headers Index Home page "click"

  1-800-643-3625     E-mail  mrtwheels@yahoo.com