RACING 30	MRW RACING WHEELS	MRW ROCK CRAWLER WHEELS	MRW OFF ROAD WHEELS	BEADLocK KITS	SHOENFELD HEADERS
ROLL CAGES	MOTORSPORTS ACCESSORIES	TECHNICAL HELP	ORDERING INFORMATION	CONTACT US	MRW HOME PAGE

MRW ROCK CRAWLER BEADLOCK WHEELS	15"WHEEL	16"WHEEL	16.5"WHEEL	17"WHEEL	18"WHEEL	20"WHEEL
*MRW* OFF ROAD WHEELS	15"WHEEL	16"WHEEL	16.5"WHEEL	17"WHEEL	18"WHEEL	20"WHEEL

MRW MANUFACTURERS OF "CUSTOM BUILT" MOTORSPORT WHEELS SINCE 1955

BEADLOCK KITS

"click"----UNTIL OUR ON LINE STORE IS AVAILABLE CALL 1-800-643-3625 OR E-MAIL-mrtwheels@yahoo.com ---- "click"

BEADLOCK KITS for Steel Wheels

MANY OTHER STYLES AND SIZES 10"to 20"ARE AVAILABLE FOR RACING, ROCKCRAWLING, OFF ROAD, AND MOST ALL OTHER MOTORSPORTS WHEELS

FEATURES
These beadlock kits were designed exclusively for dirt and asphalt track use. Each kit comes complete with all parts, ready to install on your wheels.

FOR ROCKCRAWLING APPLICATIONS CLICK HERE

MRW's Econo Loc Kits use the original wheel as a sealing surface for the inside of the tire bead. A series of 18 tab nuts are welded to the wheel. The BEADLoc ring clamps the tire bead to the wheel.

CALL FOR INFORMATION 1-800-643-3625

NO LONGER AVAILABLE

CUSHION CRUSHERS

TO ORDER CALL 1-800-643-3625

FEATURES
The "Cushion Crusher" is a cold forged, extremely strong cover designed to keep mud and wind out of wheels. It also serves to retain foam mud plugs, which are used to keep the crumbles out and the heat in the tires during caution periods on the race track.

CALL FOR INFORMATION 1-800-643-3625

MRW's Standard Lock Kits use a flat, seamless billet inner steel ring which is welded to the wheel. Each inner ring comes with eighteen 5/16" PEM fasteners installed. The outer steel ring is cold forged and counterbored for easy socket clearance during tire changes. Each kit comes with washers and GRADE 8 GOLD-TONED plated bolts.

mrtwheels@yahoo.com

MRW RACING WHEELS BEADLocK ROCKCRAWLER AND OFF ROAD WHEELS

MANUFACTURERS OF "CUSTOM BUILT" MOTORSPORTS WHEELS SINCE 1955

MARSH RACING WHEELS

16951 LOGAN CAVE ROAD

SILOAM SPRINGS, ARKANSAS 72761
Toll Free --- 1-800-643-3625
Local --- 479- 524-4157

FAX --- 479-524-5168
www.mrt-wheels.com
www.rockcrawler-mrt.com

mrtwheels@yahoo.com

ROLL CAGES TIRE GROOVER TIRE SIPING TOOL CARBIDE DISK TEAR OFFS

MAGNETIC PAINT TRACTION ADVANTAGE BEAD BREAKER TIRE IRONS LOW PRESSURE GAUGES

SAFETY INFLATOR VALVE STEMS TIRE STAGGER TAPE LUG NUTS STICK ON MRW DECALS

MRW BANNERS CHROME CENTER CAPS CRASH PROTECTION SPORTS APPAREL NECESSARY ACCESSORIES

"Click" above for product page "Click"

MRW

MANUFACTURERS OF "CUSTOM BUILT" MOTORSPORTS WHEELS SINCE 1955

STOCK CAR RACING WHEELS - CIRCLE OVAL TRACK ROUNDEROUND RACING WHEELS - SHORT TRACK RACING WHEELS - DRAG RACING WHEELS - DIRT RACING WHEELS - ASPHALT RACING WHEELS - RALLY VINTAGE RACING WHEELS - SPRINT CAR RACING WHEELS - MUD MUDDIN SWAMP SWAMPIN RACING WHEELS - BAJA RACING WHEELS - DESERT SAND RAIL RACING WHEELS - OUTBACK RACING WHEELS- WOODS RACING WHEELS - ROCK RACING WHEELS - BONNEVILLE RACING - GO KART RACING WHEELS - ICE RACING WHEELS- LAWN MOWER RACING WHEELS TUNDRA RACING WHEELS OFF ROAD WHEELS - ROCK CRAWLING WHEELS - ROCK CRAWLER WHEELS - TRACTOR PULL WHEELS - SLED PULL - BRUSHCRUSHER - HILL CLIMBER -TUG A WAR - GULLY RUNNER - BOGGER BOGGIN SWAMPER SWAMP WHEELS- - DRIFTING - WHEELEN - PULLING -JUMPING - TRAIL RIDING - DUNEBUGGY - ANTIQUE RESTORATION - HOTROD WHEELS - ROBOT VEHICLES - MOTORING - BACKROADS SITESEEING - OR JUST SHOWING OFF -

AND MANY MORE

MRW NO WARRANTY POLICY
MRW offers racing wheels and other products for sale only upon the conditions and terms contained in this disclaimer of liability and indemnity agreement. Due to many varied and different conditions to which MRW wheels and other products are exposed and because of the manner in which racing is conducted, MRW makes absolutely NO WARRANTIES (INCLUDING ANY WARRANTIES AS TO MERCHANTABILITY OR FITNESS), EITHER EXPRESSED OR IMPLIED, with respect to any MRW wheels or other products and MRW shall not be liable for any damages arising from their use.
MRW WHEELS ARE SOLD AS IS.
MRW racing wheels and tires are not tested nor labeled to meet FMVSS 109 or ECE36 safety standards. Therefore, it is dangerous and illegal to sell racing tires and wheels for use on public streets or highways. Any person selling MRT wheels, or using MRT products for street use, agrees to indemnify, hold harmless and reimburse MRW for all loss, damage, or liability including attorney's fees, MRW may suffer because of such sales or use. Not applicable where prohibited by law.
MOUNTING INSTRUCTIONS WARNING
Tire changing should done by trained personnel using proper tools and procedures. Failure to follow safe mounting procedures could cause faulty positioning of the tire and cause the assembly to burst with explosive force sufficient to cause serious personal injury or death. Clean rim and lubricate beads with rubber lubricant. Always lock rim on mounting machine or place assembly in safety cage. Use air hose with clip on chuck and extension air gauge.

THESE WHEELS WERE NOT DESIGNED FOR OFF-ROAD OR STREET USE!

click below for technical help

"click" to see offset page

"click" to see bolt pattern page

"click" to see BEAD-Loc install page

"click" to see metric imperial bias tire charts

"click" to see bolt grade specs. & conversion charts

"click" to see drill tap metal spec. fractions to decimal charts

"click" to see steel tubing hot roll metal weights and measures charts

"click" to see gear ratio chart

"click" racing tire calibration

RACING WHEELS - RACE CAR WHEELS - DIRT TRACK RACING WHEELS - CIRCLE TRACK RACING WHEELS - OVAL TRACK RACING WHEELS - ASPHALT TRACK RACING WHEELS

RACING WHEELS by MRW

SCHOENFELD HEADERS || 16# OUTLAW wheels | STAGE II wheels | STAGE III wheels | ULTRA STAR wheels | ECONO STAR wheels | CHROME wheels | STOCK CAR WHEELS | RALLY WHEELS | WHEEL PARTS | BEADLocK OPTIONS | BEADLocK KITS | BEADLocK PARTS BEADLocK INSTALLATION | CHECK` OFFSET | BOLT PATTERNS | ACCESSORIES | HISTORY | HOME |

MRW ROCK CRAWLER WHEELS 15" | 16" | 16.5 | 17" | 18" | 20"

MRW OFF ROAD WHEELS 15" | 16" | 16.5" | 17" | 18" | 20" | 22"

"QUICK CLICK" RACING WHEELS"

BEADLOCK KITS for Steel Wheels

FEATURES
These beadlock kits were designed exclusively for dirt and asphalt track use. Each kit comes complete with all parts, ready to install on your wheels.

FOR ROCKCRAWLING APPLICATIONS CLICK HERE

MRW's Econo Loc Kits use the original wheel as a sealing surface for the inside of the tire bead. A series of 18 tab nuts are welded to the wheel. The BEADLoc ring clamps the tire bead to the wheel.

CALL FOR INFORMATION 1-800-643-3625

CUSHION CRUSHERS

FEATURES
The "Cushion Crusher" is a cold forged, extremely strong cover designed to keep mud and wind out of wheels. It also serves to retain foam mud plugs, which are used to keep the crumbles out and the heat in the tires during caution periods on the race track.

CALL FOR INFORMATION 1-800-643-3625

mrtwheels@yahoo.com

ROLL CAGES	TIRE GROOVER	TIRE SIPING TOOL	CARBIDE DISK	TEAR OFFS
MAGNETIC PAINT	TRACTION ADVANTAGE	BEAD BREAKER	TIRE IRONS	LOW PRESSURE GAUGES
SAFETY INFLATOR	VALVE STEMS	TIRE STAGGER TAPE	LUG NUTS	STICK ON MRW DECALS
MRW BANNERS	CHROME CENTER CAPS	CRASH PROTECTION	SPORTS APPAREL	NECESSARY ACCESSORIES

BEADLOCK KITS for Steel Wheels

FEATURES These beadlock kits were designed exclusively for dirt and asphalt track use. Each kit comes complete with all parts, ready to install on your wheels.

FOR ROCKCRAWLING APPLICATIONS CLICK HERE

MRW's Econo Loc Kits use the original wheel as a sealing surface for the inside of the tire bead. A series of 18 tab nuts are welded to the wheel. The BEADLoc ring clamps the tire bead to the wheel.

CALL FOR INFORMATION 1-800-643-3625

CUSHION CRUSHERS

FEATURES The "Cushion Crusher" is a cold forged, extremely strong cover designed to keep mud and wind out of wheels. It also serves to retain foam mud plugs, which are used to keep the crumbles out and the heat in the tires during caution periods on the race track.

CALL FOR INFORMATION 1-800-643-3625

mrtwheels@yahoo.com

FEATURES
These beadlock kits were designed exclusively for dirt and asphalt track use. Each kit comes complete with all parts, ready to install on your wheels.

FEATURES
The "Cushion Crusher" is a cold forged, extremely strong cover designed to keep mud and wind out of wheels. It also serves to retain foam mud plugs, which are used to keep the crumbles out and the heat in the tires during caution periods on the race track.